OD01 - Analysis System

COD, BRIX, pH, CONDUCTIVITY
Analysis System

DESCRIPTION

The OD-01 analysis system provides continuous COD trend monitoring of effluent discharge. It measures effluent where the organic content derives primarily from sugars. The COD value is calculated using a proprietary algorithm based on individual measurements of refractive index, Ph and conductivity. This provides a reliable analysis solution that is faster and more economical than complex, conventional methods that use chemical reagents. The OD-01 is designed to operate reliably in typical effluent plant environments without the need for continual maintenance or adjustments. The analyzer is a stand-alone system designed to be connected to a submersible pump in the effluent flow or sump. Effluent is then circulated through the self-contained analysis unit. Analyzer cleaning and pump flushing cycles are controlled automatically. The analyzer can be installed on the effluent water outlet of a specific process or on the main collection manifold.

BENEFITS
DOWNLOADS
CONTACT US
Application: Measurements of waste water
Equivalent COD
Measurements Limits: 0…958800 mg/l-O2
Accuracy: ±800 mg/l-O2 in the range 0…100.000 mg/l-O2 or equiv-alent COD
Brix
Measurements Limits: 0.10…85.00 Brix
Accuracy: 0.3% of Scale Range; maximum accuracy (±0.05 Brix)
pH
Measurements Limits: 0.00…14.00 pH
Accuracy: ±0.05 pH
Conductivity
Measurements Limits: 0…5000 μS/cm (20 °C)
Accuracy: ±30 μS/cm

SERVICE REQUEST

Send a request: Maselli Technical Center is there to assist you solving any technical issue your equipment is facing.